Nora Lighting 8" 100W Architectural HID Ceramic Metal Halide Remodel Frame-in
Eight inch architectural down light rated for use with one ceramic metal halide lamp driven by solid state electronic ballast for improved efficiency, color rendering, and color maintenance. For use in existing sheet rock ceilings where access is only available from below the ceiling. Use in non insulated ceiling, where insulation can be kept 3" from fixture, and 1/2" from adjacent building components.
Ballast: 100W 120V or 277V Electronic
Lamp Types: 100W ED17 or PAR38 CMH (not included)
Socket Cup: Slots on neck of each reflector allow vertical adjustment of socket cup for optimum light distribution and output.
Minimum Clearances: Non-IC housings require a minimum clearance of 3" from thermal insulation and 1/2" from adjacent building components
Mounting: High tension tempered steel springs secure remodel housing evenly to ceiling; hole cutout template provided for convenience.
Ceiling Thickness: Accepts 1/2" to 3/4" maximum ceiling thickness
Lamp Adjustment: Reflectors have three adjustment slots for optimal light distribution
Junction Box: 69 cu inch enclosure with seven 1/2" knockouts, four pry-outs and snap on covers. Ground wire connected on bottom of box.
Quartz Restrike Option: Quartz double contact bayonet base can be added as an option for use with ED17 lamp
Plaster Frame: Architectural quality 0.050 galvanized steel ring riveted to elevated 0.064 steel junction box and ballast tray.
Socket: Porcelain 4KV pulse rated medium screw base socket.
Width: 8 1/2"
Depth: 9 3/4"
Ceiling opening: 8 1/4"
If in stock, item ships in 3 to 5 business days.
cULus Damp Location with Feed Through
cULus Wet Location (Only with designated trims)
This product hasn't received any reviews yet. Be the first to review this product!